What Is Cove Base? Wall Base Sizes, Types & Install Guide
Posted by TheCornerGuardStore on 12th Nov 2026
Quick answer: Cove base (also called wall base or base molding) is the flexible strip that runs along the bottom of a wall where it meets the floor. It covers the joint between wall and floor, hides small gaps, and protects the bottom of the wall from mops, vacuums, carts and shoes. It's the standard finish in schools, hospitals, offices and stores because it's durable, easy to clean and inexpensive compared with wood baseboard.
Why is it called "cove" base?
The name comes from the small curved toe at the bottom of the profile. The toe sweeps out onto the floor, so there's no sharp 90° corner where dirt and water collect. That makes the floor-wall joint easy to mop, which is why cove base is used wherever floors are cleaned wet.
Toe or toeless: which do I need?
- With a toe (coved): for hard floors such as VCT, sheet vinyl, LVT, tile, sealed concrete and epoxy. The toe sits on the floor and seals the joint.
- Toeless (straight): for carpet. The bottom edge tucks against the carpet instead of sitting on top of it.
What sizes does cove base come in?
| Spec | Common options |
|---|---|
| Height | 2.5in, 3in, 3.5in, 4in, 4.5in and 6in. 4in is the most common in commercial buildings; 6in is used where more wall needs protecting or to cover damage. |
| Thickness (vinyl) | .080in (standard duty) and 1/8in (.125in, heavier duty) |
| Length | 4ft pieces (sold by the carton) or long rolls; metal base in 48in, 96in and 120in lengths |
| Corners | Pre-formed inside and outside corners, or the base is wrapped around the corner |
Vinyl vs rubber cove base
- Vinyl: the economical choice. Good for offices, retail and most corridors. Available in .080in and 1/8in.
- Rubber (thermoset): more flexible, so it wraps corners and follows uneven walls more easily, and it resists scuffs and impact better. A good fit for schools, healthcare and high-traffic areas.
- Metal (stainless steel or diamond plate aluminum): for kitchens, loading areas, back-of-house corridors and anywhere carts, pallet jacks or floor scrubbers hit the base. Stainless is hygienic and easy to clean; diamond plate adds grip-pattern durability.
How is cove base installed?
- Make sure the wall is clean, dry and free of loose paint and dust.
- Dry-fit the pieces and plan the corners (pre-formed corners give the cleanest look).
- Apply cove base adhesive to the back of each piece, leaving a small margin at the top edge.
- Press the base firmly to the wall, toe down, and roll it to get full contact.
- Butt the joints tightly; wipe away any excess adhesive.
Metal base is installed differently. See our stainless steel and diamond plate cove base installation instructions.
Shop cove base
- Vinyl and rubber cove base: Traditional Vinyl (.080in and 1/8in), Thermoset Baseworks rubber, designer and millwork profiles, carpet base
- Stainless steel cove base
- Diamond plate aluminum cove base (.060in; 4in, 4.75in and 6in heights; inside and outside corners)
Frequently asked questions
What is the difference between cove base and baseboard?
Baseboard is usually wood or MDF trim nailed to the wall. Cove base is a flexible vinyl, rubber or metal strip glued to the wall, made to stand up to wet cleaning and impact in commercial spaces.
What thickness of vinyl cove base should I use?
.080in suits most offices and retail space. Choose 1/8in where the base takes more abuse: corridors with carts, schools and healthcare.
Can cove base go over carpet?
Use toeless (straight) base with carpet. Base with a toe is meant for hard floors.
Can I get custom sizes or large quantities?
Yes. Call 800-516-4036 or email sales@thecornerguardstore.com for a quote.