What Size Corner Guard Do I Need? Wing, Length & Angle
Posted by TheCornerGuardStore on 12th Nov 2026
Quick answer: Sizing a corner guard comes down to four things: wing width, length, corner angle and material thickness. Get those right and the guard covers the damage zone without looking oversized.
1. Wing width: how far it covers each wall
The wing is how far the guard extends along each face of the wall, measured from the corner. We stock wings from 1/2in to 4-1/2in (1/2, 3/4, 1, 1-1/2, 2, 2-1/2, 3, 3-1/2, 4 and 4-1/2in).
| Setting | Typical wing |
|---|---|
| Homes, offices, light foot traffic | 3/4in to 1-1/2in |
| Retail, restaurants, school hallways | 1-1/2in to 2-1/2in |
| Hospitals, carts, beds, pallet jacks | 2-1/2in to 4-1/2in |
Look at the existing damage: choose a wing a little wider than the scuffs and dents that already reach out from the corner.
2. Length: how high it goes
- 48in (4ft): covers the zone where carts, chairs and luggage hit. The most popular length.
- 92in to 96in (about 8ft): full height on a standard 8ft wall. The 92in and 94in lengths leave room for wall base at the bottom or a ceiling gap at the top.
- 108in and 120in: for taller walls.
- 24in, 36in, 60in, 72in and 84in for everything in between, and custom lengths on request.
3. Corner angle: 90° or 135°?
- 90°: the standard square outside corner. This is what most walls need.
- 135°: for angled walls, where a wall turns at 45° (common in hallways and bump-outs).
- Rounded (bullnose) drywall corners: use a bullnose corner guard matched to the radius. See how to measure a bullnose corner.
- Unusual angles: adjustable-angle Lexan guards flex to fit.
- Columns: 3-sided corner guards wrap a column or wall end.
4. Thickness and gauge
| Material | Options we stock | Note |
|---|---|---|
| Stainless steel | 14, 16 and 18 gauge | Lower gauge = thicker. 16ga is the most popular all-round choice; 14ga for the heaviest impact. |
| Aluminum | .060in, .080in, .125in | Pre-anodized or un-anodized. |
| Brass | .040in, .063in | Brushed or mirror finish. |
| Diamond plate | .063in, .125in | Textured, heavy-duty look. |
Need gauge-to-inch conversions? See our stainless steel types and gauges page.
Quick checklist
- Measure how far damage reaches out from the corner, and add a little. That's your wing.
- Measure how high impacts happen. That's your length (48in or full height).
- Check the angle: square (90°), angled (135°), rounded (bullnose) or column (3-sided).
- Pick the material and thickness for the impact level and the look you want.
Frequently asked questions
What is the most common corner guard size?
A 48in long, 90° guard with 1-1/2in to 2in wings is the most common in commercial buildings.
Can I get custom sizes, finishes or lengths?
Yes. Many sizes ship from stock, and custom lengths, wings and finishes are available on quote. Call 800-516-4036 or email sales@thecornerguardstore.com.
Where do I start shopping?
Browse all corner guards, or go straight to stainless steel, aluminum, vinyl or clear Lexan.