NOTE: This product is not returnable.
This brass corner guard protects outside wall corners from carts, dollies, equipment and everyday traffic in hospitals, schools, offices, warehouses and other commercial spaces. It's formed in one piece from .040in-thick unlacquered Muntz brass with a #8 mirror (polished) finish: a polished, warm metal for lobbies, hospitality and historic interiors. At 108in long, it covers the corner up to 9 feet, which is floor-to-ceiling in many commercial spaces. The 2.5in wings protect the corner edge and the wall right beside it while keeping a slim profile.
Features
- .040in-thick unlacquered Muntz brass, factory-formed from a single sheet with a 1/8in radius corner
- #8 mirror (polished) finish. It ships with a protective film you peel off after installation
- 90° profile for standard square outside corners. 135° and custom angles are also available
- Mounting options: Basic (install with your own construction adhesive), Self-Stick Tape, or pre-drilled Holes for #8 stainless screws
- Edge options: Wings (a 10° return bend along each edge), ArtDeco, and Rounded Corners, alone or combined
- Custom lengths and wing sizes, up to 144in in a single piece
- Lifetime warranty on the brass against defects in material and workmanship (self-stick tape is not covered)
Specifications
| Length | 108in (2743.2mm) |
| Wings | 2.5in x 2.5in (63.5mm x 63.5mm) |
| Angle | 90° |
| Material | unlacquered Muntz brass, .040in |
| Finish | #8 mirror (polished) |
| Corner radius | 1/8in (3.2mm) |
| Mounting | Basic (customer-supplied adhesive), self-stick tape, or screws |
| CSI section | 10 26 13 Corner Guards |
Installation & Ordering
The Basic option installs with construction adhesive you supply (such as Liquid Nails), applied in a zig-zag pattern on each inside wing. You can also order it with Self-Stick Tape or pre-drilled holes for screws. Self-Stick Tape is an installation convenience and is not covered by the warranty. For high-traffic areas or heavy impact, use pre-drilled holes or construction adhesive, alone or together with the tape. Over vinyl wall coverings, trim a strip of the vinyl under each wing so the adhesive bonds to the wall. Clean it with warm water and mild soap, then wipe dry. Unlacquered brass develops a natural patina over time. That is normal for the metal and is not covered by the warranty. Step-by-step instructions are in the Documentation section below. Standard lead time is about 6–8 business days. If you need guards sooner, see our Ships Today category or call 800-516-4036. Bulk pricing applies automatically in the cart: 10% off 20–49, 15% off 50+.
Product Description
Brass Corner Guard
108in x 2.5in x 2.5in(2743.2mm x 63.5mm x 63.5mm)
90 Degree, 060, Unlacquered, Polished #8 (Mirror) Finish
Documentation
- Drawing 90 Deg - Hole Pattern Approximate (680k)
- Drawing 135 Deg - Hole Pattern Approximate (680k)
- Drawing - 2020 Corner Guard Hole Pattern (102k)
- Suggested Specifications.pdf (250k)
- TheCornerGuardStore Warranty (165k)
- Installation Instructions for Brass Corner Guards (450k)
- FAQ - Adhesive Installation
Note on Unlacquered Brass
Our brass products are unlacquered, meaning they are left in their natural state without a clear protective coating. Unlike lacquered brass, which is sealed to maintain a uniform, polished appearance, unlacquered brass will naturally age and develop a patina.
-
Description
NOTE: This product is not returnable.
This brass corner guard protects outside wall corners from carts, dollies, equipment and everyday traffic in hospitals, schools, offices, warehouses and other commercial spaces. It's formed in one piece from .040in-thick unlacquered Muntz brass with a #8 mirror (polished) finish: a polished, warm metal for lobbies, hospitality and historic interiors. At 108in long, it covers the corner up to 9 feet, which is floor-to-ceiling in many commercial spaces. The 2.5in wings protect the corner edge and the wall right beside it while keeping a slim profile.
Features
- .040in-thick unlacquered Muntz brass, factory-formed from a single sheet with a 1/8in radius corner
- #8 mirror (polished) finish. It ships with a protective film you peel off after installation
- 90° profile for standard square outside corners. 135° and custom angles are also available
- Mounting options: Basic (install with your own construction adhesive), Self-Stick Tape, or pre-drilled Holes for #8 stainless screws
- Edge options: Wings (a 10° return bend along each edge), ArtDeco, and Rounded Corners, alone or combined
- Custom lengths and wing sizes, up to 144in in a single piece
- Lifetime warranty on the brass against defects in material and workmanship (self-stick tape is not covered)
Specifications
Length 108in (2743.2mm) Wings 2.5in x 2.5in (63.5mm x 63.5mm) Angle 90° Material unlacquered Muntz brass, .040in Finish #8 mirror (polished) Corner radius 1/8in (3.2mm) Mounting Basic (customer-supplied adhesive), self-stick tape, or screws CSI section 10 26 13 Corner Guards Installation & Ordering
The Basic option installs with construction adhesive you supply (such as Liquid Nails), applied in a zig-zag pattern on each inside wing. You can also order it with Self-Stick Tape or pre-drilled holes for screws. Self-Stick Tape is an installation convenience and is not covered by the warranty. For high-traffic areas or heavy impact, use pre-drilled holes or construction adhesive, alone or together with the tape. Over vinyl wall coverings, trim a strip of the vinyl under each wing so the adhesive bonds to the wall. Clean it with warm water and mild soap, then wipe dry. Unlacquered brass develops a natural patina over time. That is normal for the metal and is not covered by the warranty. Step-by-step instructions are in the Documentation section below. Standard lead time is about 6–8 business days. If you need guards sooner, see our Ships Today category or call 800-516-4036. Bulk pricing applies automatically in the cart: 10% off 20–49, 15% off 50+.
Product Description
Brass Corner Guard
108in x 2.5in x 2.5in(2743.2mm x 63.5mm x 63.5mm)
90 Degree, 060, Unlacquered, Polished #8 (Mirror) FinishDocumentation
- Drawing 90 Deg - Hole Pattern Approximate (680k)
- Drawing 135 Deg - Hole Pattern Approximate (680k)
- Drawing - 2020 Corner Guard Hole Pattern (102k)
- Suggested Specifications.pdf (250k)
- TheCornerGuardStore Warranty (165k)
- Installation Instructions for Brass Corner Guards (450k)
- FAQ - Adhesive Installation
Note on Unlacquered Brass
Our brass products are unlacquered, meaning they are left in their natural state without a clear protective coating. Unlike lacquered brass, which is sealed to maintain a uniform, polished appearance, unlacquered brass will naturally age and develop a patina.
