Product Description
Diamond Plate Corner Guard
36in x 0.5in x 0.5in (914.4mm x 12.7mm x 12.7mm)
135 Degree, 125, Tread Brite, Polished #8 (Mirror) Finish
This diamond plate aluminum corner guard protects outside wall corners from carts, dollies, equipment and everyday traffic in hospitals, schools, offices, warehouses and other commercial spaces. It's formed in one piece from .125in-thick Tread Brite diamond plate aluminum with a bright diamond-tread finish: the raised diamond pattern gives it the rugged look common in warehouses, garages and loading areas. At 36in long, it protects the lower part of the corner, where it sits above a wall base or covers one spot that keeps getting hit. The 0.5in wings keep a low, discreet profile on the wall.
Features
- .125in-thick Tread Brite diamond plate aluminum, factory-formed from a single sheet with a 1/8in radius corner
- Bright diamond-tread finish
- 135° profile for angled outside corners. 90° and custom angles are also available
- Mounting options: Basic (install with your own construction adhesive)
- Edge options: Rounded Corners
- Custom lengths and wing sizes, up to 144in in a single piece
- Lifetime warranty on the aluminum against defects in material and workmanship
Specifications
| Length | 36in (914.4mm) |
| Wings | 0.5in x 0.5in (12.7mm x 12.7mm) |
| Angle | 135° |
| Material | Tread Brite diamond plate aluminum, .125in |
| Finish | bright diamond-tread |
| Corner radius | 1/8in (3.2mm) |
| Mounting | Basic (customer-supplied adhesive) |
| CSI section | 10 26 13 Corner Guards |
Installation & Ordering
The Basic option installs with construction adhesive you supply (such as Liquid Nails), applied in a zig-zag pattern on each inside wing. Over vinyl wall coverings, trim a strip of the vinyl under each wing so the adhesive bonds to the wall. Clean it with warm water and mild soap, then wipe dry. Step-by-step instructions are in the Documentation section below. Standard lead time is about 6–8 business days. If you need guards sooner, see our Ships Today category or call 800-516-4036.
Documentation
- Complete Documentation Package - all documents in one PDF (1.1 MB)
- Drawing 90 Deg - Hole Pattern Approximate (680k)
- Drawing 135 Deg - Hole Pattern Approximate (680k)
- Suggested Specifications.pdf (250k)
- TheCornerGuardStore Warranty (165k)
- Installation Instructions for Diamond Plate Corner Guards (450k)
- FAQ - Adhesive Installation
-
Description
Product Description
Diamond Plate Corner Guard
36in x 0.5in x 0.5in (914.4mm x 12.7mm x 12.7mm)
135 Degree, 125, Tread Brite, Polished #8 (Mirror) FinishThis diamond plate aluminum corner guard protects outside wall corners from carts, dollies, equipment and everyday traffic in hospitals, schools, offices, warehouses and other commercial spaces. It's formed in one piece from .125in-thick Tread Brite diamond plate aluminum with a bright diamond-tread finish: the raised diamond pattern gives it the rugged look common in warehouses, garages and loading areas. At 36in long, it protects the lower part of the corner, where it sits above a wall base or covers one spot that keeps getting hit. The 0.5in wings keep a low, discreet profile on the wall.
Features
- .125in-thick Tread Brite diamond plate aluminum, factory-formed from a single sheet with a 1/8in radius corner
- Bright diamond-tread finish
- 135° profile for angled outside corners. 90° and custom angles are also available
- Mounting options: Basic (install with your own construction adhesive)
- Edge options: Rounded Corners
- Custom lengths and wing sizes, up to 144in in a single piece
- Lifetime warranty on the aluminum against defects in material and workmanship
Specifications
Length 36in (914.4mm) Wings 0.5in x 0.5in (12.7mm x 12.7mm) Angle 135° Material Tread Brite diamond plate aluminum, .125in Finish bright diamond-tread Corner radius 1/8in (3.2mm) Mounting Basic (customer-supplied adhesive) CSI section 10 26 13 Corner Guards Installation & Ordering
The Basic option installs with construction adhesive you supply (such as Liquid Nails), applied in a zig-zag pattern on each inside wing. Over vinyl wall coverings, trim a strip of the vinyl under each wing so the adhesive bonds to the wall. Clean it with warm water and mild soap, then wipe dry. Step-by-step instructions are in the Documentation section below. Standard lead time is about 6–8 business days. If you need guards sooner, see our Ships Today category or call 800-516-4036.
Documentation
- Complete Documentation Package - all documents in one PDF (1.1 MB)
- Drawing 90 Deg - Hole Pattern Approximate (680k)
- Drawing 135 Deg - Hole Pattern Approximate (680k)
- Suggested Specifications.pdf (250k)
- TheCornerGuardStore Warranty (165k)
- Installation Instructions for Diamond Plate Corner Guards (450k)
- FAQ - Adhesive Installation
