Product Description
Diamond Plate Aluminum Cove Base Molding Straight
6in x 120in (152.4mm x 3048mm)
.60, Diamond Plate Aluminum

This diamond plate aluminum cove base molding protects the bottom of walls from mop buckets, carts, floor machines and foot traffic, where painted walls and vinyl base wear out first. It's made from .060in-thick diamond plate aluminum with a bright diamond-tread finish, for the rugged look common in warehouses, garages and loading areas. This 6in tall, 120in long straight section runs along the base of the wall; matching pre-formed inside and outside corners finish the corners without field bending.

Features

• .060in-thick diamond plate aluminum
• Bright diamond-tread finish
• Heights: 4in, 4.75in and 6in
• Lengths: 48in, 94in, 96in and 120in straight sections
• Pre-formed inside and outside corners to match
• Lifetime warranty on the aluminum against defects in material and workmanship

Specifications

Installation & Ordering

Install it with polyurethane-based construction adhesive after the wall finish is applied, and before finishes such as wall tile, stainless steel wall sheeting or FRP. Clean the wall first so it's free of dirt and loose particles. Step-by-step instructions and CAD drawings are in the Documentation section below. Lead time: Approximately 2-3 weeks until shipment. Questions? Call 800-516-4036.

Documentation

• Suggested Specifications.pdf
• Brochure and Suggested Specifications.pdf
• TheCornerGuardStore Warranty
• Installation Instructions for Diamond Plate Cove Base Molding
• FAQ - Adhesive Installation

CAD Drawings

• 4.75in_Base_Molding_Inside_Outside_Corner_Drawing
• 4in_Base_Molding_Drawing
• 6in_Base_Molding_Drawing
• 6in_Inside_Corner_Molding_Drawing
• 6in_Outside_Corner_Moulding_Drawing